Hi Guest, Welcome to the quilting forums, register now —or—

Results 1 to 3 of 3
  1. #1
    Shiny Thimble

    Join Date
    Apr 2018
    Posts
    3
    Post Thanks / Like

    Red face Another question

    I noticed that the 10in squares I got from MSQC have scalloped edges and are 10in including the scalloped edges. When I watch Jenny using them hers don't have the scalloped edges. Are we supposed to cut them prior to using them? If so then they are no longer 10in squares
    Thanks
    JeannieF

  2. #2
    Missouri Star

    Join Date
    Jun 2016
    Location
    Puyallup, Washington
    Posts
    1,594
    Post Thanks / Like

    Default Re: Another question

    Some manufacturers use pinking cutters when cutting the 10inch squares, some don't. Best to measure your squares to determine if the 10" is the outter edge (peak) of the pinking or the inner (valley) edge, then use that as your guide. Most often you don't need to trim.

  3. #3
    Missouri Star

    Join Date
    Jul 2013
    Location
    Colorado
    Posts
    6,883
    Post Thanks / Like

    Default Re: Another question

    As with all pre-cuts, measure before using to make sure the dimensions are accurate. Sometimes they can be off 1/8" to 1/4".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •