Announcement

Collapse
No announcement yet.

HELP! What the heck do I do with this...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Connie Chamberlain
    replied
    Re: HELP! What the heck do I do with this...

    DSCN0413.jpg

    This is the back. What sewing machine do you have.That doesn't matter i just want to know.
    Last edited by Connie Chamberlain; March 12, 2011, 12:42 PM.

    Leave a comment:


  • Connie Chamberlain
    replied
    Re: HELP! What the heck do I do with this...


    Forgot to take picture of back.

    Leave a comment:


  • Connie Chamberlain
    replied
    Re: HELP! What the heck do I do with this...

    Try another size,presser foot up or down?
    Last edited by Connie Chamberlain; March 12, 2011, 12:30 PM.

    Leave a comment:


  • Loonwatcher
    replied
    Re: HELP! What the heck do I do with this...

    Tighten the tension - I do have one more notch on the dial. Change needle - you mean to just get a fresh sharp one? Or a different size?

    Leave a comment:


  • Blondie
    replied
    Re: HELP! What the heck do I do with this...

    you could also change your needle.

    Leave a comment:


  • Connie Chamberlain
    replied
    Re: HELP! What the heck do I do with this...

    Maybe tighten your thread tension maybe?Connie

    Leave a comment:


  • bakermom
    replied
    Re: HELP! What the heck do I do with this...

    not an expert by any means, but first I would rethread the whole machine just in case. does is help if you slow down a bit? I've read that you can get loops like this on curves if you're sewing too fast. i don't do a lot of FMQ but others here do.

    Leave a comment:


  • Loonwatcher
    started a topic HELP! What the heck do I do with this...

    HELP! What the heck do I do with this...

    My 1st attemp at machine quilting - FAILURE!! Good thing I was doing a practice piece before I went to my project piece. As you can see from the top I need allot of practice. But it gets worse. Look at the bottom - what's going on with the bobbin thread??? What's causing it to bunch like that? I increased the tension for the straight lines and it's a little better but still a problem. I have one more notch on the tension dial. What should I do? I know you folks will have the answer.

    HELP! What am I doing wrong. I'd like to finish my project (a handbag) this weekend so I can take it on vacation with me next week.

    ]
Working...
X