Announcement

Collapse
No announcement yet.

On the subject of scissors...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GuitarGramma
    replied
    Re: On the subject of scissors...

    Originally posted by GrammaBabs View Post
    Who can tell me the BEST sicssors for snipping the threads from machine embroidery.. this means they must be sharp from the middle to the very tip.. and the tip must be fine and pointed to get under "jumps".. Any input.. I've bought so many and none are up to snuff in my opion... would not hurt if the handles had "LARGE holes"... arthritic knuckles are another challenge.. thanks!!
    Sewforless.com has a wide variety of scissors for embroidery. You might check out their offerings.

    Leave a comment:


  • Sharyn J
    replied
    Re: On the subject of scissors...

    Originally posted by GrammaBabs View Post
    Who can tell me the BEST sicssors for snipping the threads from machine embroidery.. this means they must be sharp from the middle to the very tip.. and the tip must be fine and pointed to get under "jumps".. Any input.. I've bought so many and none are up to snuff in my opion... would not hurt if the handles had "LARGE holes"... arthritic knuckles are another challenge.. thanks!!
    Barb, I just bought these KAI as a gift for a friend who has embroidery machine. I have not sent them yet, so not sure how they'll work out for her. These are the double curved 5" (N5130) which are very sharp, right to the tip. I have a similar pair of 4" (N5100) which is curved only at the tip and I love them for applique. The finger holes are normal size.
    http://www.kaiscissors.com/item_images/5130-r3.jpg

    http://www.kaiscissors.com/category.php?category_id=50
    Last edited by Sharyn J; February 22, 2014, 10:01 AM. Reason: add link

    Leave a comment:


  • Jean Sewing Machine
    replied
    Re: On the subject of scissors...

    Originally posted by GrammaBabs View Post
    Who can tell me the BEST sicssors for snipping the threads from machine embroidery.. this means they must be sharp from the middle to the very tip.. and the tip must be fine and pointed to get under "jumps".. Any input.. I've bought so many and none are up to snuff in my opion... would not hurt if the handles had "LARGE holes"... arthritic knuckles are another challenge.. thanks!!
    Gingher embroidery scissors, they have the tiniest tip for ripping. Stay sharp and true for a long time! They cost about $28, but are so worth it. NOBODY uses my Ginghers except me!

    Leave a comment:


  • bubba
    replied
    Re: On the subject of scissors...

    Mine are similar to that, but a little different. I'm sure they work the same. They are also the ones that I stabbed myself in the leg with last fall, so I know they are still good and sharp! Went in well over an inch.....OUCH!

    Leave a comment:


  • toggpine
    replied
    Re: On the subject of scissors...

    I think these are the scissors (or at least the latest versions of them) that both Pat & I have for thread trimming. No holes for arthritis to get hung up in, and they have a spring to assist opening & closing. Mine are still very sharp & I think I've had mine about 20 years too. Mine came with a pair of larger 8" bent handled shears that had the same spring loaded handles. They are still sharp too.
    Fiskars soft-touch Fiskars Softouch Spring Action Scissors | OfficeSupply.com

    Leave a comment:


  • bubba
    replied
    Re: On the subject of scissors...

    I like my little Fiskars for nipping of the threads. They look like a rectangle when the cap is on. I can't remember what they are called, but I have had them well over 20 years. Best part, they are still in the stores!

    The Kais are also sharp to the very tip. I just got 5" and 6" pairs and love them. So much easier to use that my Gingers as they are very lightweight. You won't be disappointed. Find a place that sells them and go try them out first! That is what I did.

    Leave a comment:


  • GrammaBabs
    replied
    Re: On the subject of scissors...

    Who can tell me the BEST sicssors for snipping the threads from machine embroidery.. this means they must be sharp from the middle to the very tip.. and the tip must be fine and pointed to get under "jumps".. Any input.. I've bought so many and none are up to snuff in my opion... would not hurt if the handles had "LARGE holes"... arthritic knuckles are another challenge.. thanks!!

    Leave a comment:


  • New York Sue
    replied
    Re: On the subject of scissors...

    I can't speak of Kai's, but I LOVE my 'Big Girl' Gingher's.
    I would never part with them, and I waited way too long to get them! You'll understand, once you take the plunge!
    And had they not been a gift, I probably still wouldn't have them...

    Leave a comment:


  • yeeehawterri
    started a topic On the subject of scissors...

    On the subject of scissors...

    I rarely use scissors except for trimming threads (I have my snips for that) and trimming excess batting when laying out a sandwich, and use a cheap pair of Fiskars. They wear my hand out. So reading the glowing reports on Kai scissors, I'm considering buying a pair. Just not sure what size. Would the 8" be a good size for general cutting? Specifically speaking about long lengths of cutting.
Working...
X